Wednesday, 15 June 2011

USB HID rotary encoder


I collected information and code of my older project. You can connect the rotary encoder to the USB and scroll with it in the menus. It's only a proof-of-concept. Take inspiration but don't take the exactly same code :)

http://www.martinhubacek.cz/electronics/usb-rotary-encoder

4 comments:

  1. To vypadalo tak jednoduse, ze jsem to zkusil a bohuzel w7 nepoznaj zarizeni. Neco tam vidi, ale nevi co. Zkusil jsem i HIDkeys a totez. Nejakej napad?

    ReplyDelete
  2. Je to už starý projekt, ale taky jsem jej nedávno vytáhnul z šuplíku a nefungovalo mi to na nových Win7, chovalo se to vlastně stjeně, jak uvádíte. Už je to dávno a netuším, kde by mohl být problém. Jestli nefunguje ani originální HIDkeys, tak to bude větší záhada.

    ReplyDelete
  3. Jeste jsem to zkousel na xpckach a totez. Po netu jsem taky nasel par podobnych dotazu, tak snad neni chyba u me. Skoda, chtel jsem z toho udelat neco pro letecky simulator, ale nastudovat to vsechno a predelat je trochu nad moje sily :) Diky za odpoved, jestli neco najdu, hodim to sem.

    ReplyDelete
  4. Inventor CAM is a part of} Autodesk that's used to simplify CNC design and programming. Some of its features include a reduction of roughing time, minimization of tool paths, and can program 4 and Cotton Duvet Covers 5 axes cuts. It consists of analysis tools to measure distances and can monitor pace, feed, and machining time. Before the CAD designed model could be turned into machine language, the CAM software determines the cutting paths for the tools for the elimination of the excess materials from the workpiece. CAD and CAM work together to offer the CNC machine with the correct and accurate instructions to perform the required cutting operations.

    ReplyDelete